Front Coil Spring Specs C45-256 (40mm-1.5") Stock Load C45-254 (40mm-1.5") 110-220lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height ****Coil seat for IMS43-50800 should be set at 220mm(8.66") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Rear Extended Shackles will provide 1" of lift ****Coil seat for IMS43-50800 should be set at 220mm(8.66") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Rear Quick Ride Kit blocks will provide 2" of lift ****Coil seat for IMS43-50800 should be set at 220mm(8.66") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Rear Extended Shackles will provide 1" of lift Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Rear Quick Ride Kit blocks will provide 2" of lift Strut assembly instructions --Dobinsons offer this complete 1.5" to 2.0" suspension system for the 2006-2015Mitsubishi Triton ML/MN, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs and Extended Rear Shackles Extended Rear Shackles provide 1" of lift with no extra weight. If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut assembly instructions

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs, Rear Quickride lift blocks and U bolts Rear Quickride lift blocks and U bolts lift 1.25 or 2 inches only no extra weight. If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut assembly instructions

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs, Rear Quickride lift blocks and U bolts with strut caps and assembled front coil overs. Rear Quickride lift blocks and U bolts lift 2 inches only no extra weight. Dobinsons offer this complete 2.0" suspension system for the 2005-2015 Toyota Hilux Vigo Double Cab (4-door), designed to give a great ride front and rear, for stock vehicles looking for 2.0" of lift, without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2" lift blocks and zinc coated u-bolts.Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.Dobinsons IMS Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.All Dobinsons coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height If pairing with a U-bolt Flip Kit plate, request UB59-453-1K in the order notes. IMS59-50941 shocks require 24" brake lines and 3" bump stop extensions or a bump stop that is at least 3" longer than OEM --Double cab Long bed will yield about 1" less of lift in the rear. Dobinsons offer this complete 1.5" to 3.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Internal Monotube Shock absorbers are made from the world™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons Internal Monotube Shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsonsâ„¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment. Note: If you have a single cab, or a 2 Wheel Drive Pre-Runner, contact Dobinsons first for suspension, otherwise the lift height and ride quality may be different than listed here.

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs and Extended Rear Shackles Extended Rear Shackles provide 1" of lift with no extra weight. If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut Assembly Instructions

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs, Rear Spacer Blocks and U-Bolts If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut Assembly Instructions

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM-HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair) and Extended Rear Shackles Extended Rear Shackles provide 1" of lift with no extra weight. If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut Assembly Video Front Strut Assembly Instructions

Front Coil Spring Specs C59-300 - 40mm (1.6") lift, Stock Weight C59-302 - 50mm (2.0") lift, Stock Weight C59-314 - 50mm (2.0") lift, 110-220lb Load / 75mm (3.0") lift, stock weight C59-352 - 75mm (3.0") lift, 110-220lb Load 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM-HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts Rear Quickride lift blocks and U bolts lift 1.25 or 2 inches only no extra weight. If you have a 2.5 diesel or 2.7L gas engine consult dobinsons for the propper lift. Strut Assembly Video Front Strut Assembly Instructions

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM-HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design If pairing with a U-bolt Flip Kit plate, request UB59-453-1K in the order notes. MRA59-A941 shocks require 24" brake lines and 3" bump stop extensions or a bump stop that is at least 3" longer than OEM Reservoir Installation Instructions Front Strut Assembly Instructions Strut Assembly Video -- Double cab Long bed will yield about 1" less of lift in the rearDobinsons offer this complete 1.5" to 3.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment. Note: If you have a single cab, or a 2 Wheel Drive Pre-Runner, contact Dobinsons first for suspension, otherwise the lift height and ride quality may be different than listed here.

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height If pairing with a U-bolt Flip Kit plate, request UB59-453-1K in the order notes. Strut assembly Instructions -- Double Cab Long Bed Tacomas will yield about 1" less of lift in the rear. Dobinsons offer this complete 1.5" to 3.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and leaf springs with bushings and u-bolts. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment. Note: If you have a single cab, 2 Wheel Drive Pre-Runner or a Double Cab Long Bed contact Dobinsons first for suspension, otherwise the lift height and ride quality may be different than listed here.