- Shop
- About Us
- Mill Creek Installs
-
Select Your Vehicle
Build Your Vehicle
- Media
-
Dobinsons Rear Airbag to Coil Conversion Kit for Prado 120 and 150, Lexus GX470 and GX460(WA59-561K) - WA59-561K
Simple bolt-in design High quality steel base, powder coated, with all proper grade hardware OE quality upper rubber coil isolators with built-in bump stops All inclusive kit, nothing else is needed except for suitable coil springs Lifts 1/2 inch Installation Instructions --Dobinsons offer this bolt in conversion kit, to be able to convert the factory rear airbag suspension to use Dobinsons coil springs. Properly molded lower coil spring poly isolator to ensure the spring doesn''t move out of position, and doesn''t create any noise. Kit includes: 2 poly coil isolators for base of the coil to capture the pigtail correctly, and 2 OE type rubber upper coil isolators with built-in bump stops. This kit was designed for and will work on all rear airbag-equipped Toyota Land Cruiser Prado 120 and 150 series, as well as Lexus GX470 and GX460 models.
Regular price $365.00Regular priceUnit price / per -
Dobinsons 15mm Coil Spacers Pair(PS45-4012) - PS45-4012
High Quality Polyurethane, maintains height over time Perfect fit between OE isolator and coil seat Sold as 1 pair, available front and rear for several vehicles Lasts longer than rubber Easy to add lift height for worn coils -- Poly Coil spacer 15mm of lift. Sold as a pair. Dobinsons Spring & Suspension offer these quality polyurethane coil spacers, designed to add additional lift to your vehicle if your coil springs have sagged or lost height over time. Sold in pairs, each spacer is intended to be mounted between the coil seat and the original coil isolator, to avoid any possible noise issues. NOTE: Adding coil spring spacers to the vehicle may cause "coil bind" (all coils closed together) before the bump stop comes into effect. This can cause very serious damage to the spring and/or suspension components. Please consider this before ordering.
Regular price $75.00Regular priceUnit price / per -
Dobinsons Rear Airbag to Coil Conversion Kit for Prado 120 and 150, Lexus GX470 and GX460(WA59-561K) - WA59-561K
Simple bolt-in design High quality steel base, powder coated, with all proper grade hardware OE quality upper rubber coil isolators with built-in bump stops All inclusive kit, nothing else is needed except for suitable coil springs Lifts 1/2 inch Installation Instructions Dobinsons offer this bolt in conversion kit, to be able to convert the factory rear airbag suspension to use Dobinsons coil springs. Properly molded lower coil spring poly isolator to ensure the spring doesn''t move out of position, and doesn''t create any noise. Kit includes: 2 poly coil isolators for base of the coil to capture the pigtail correctly, and 2 OE type rubber upper coil isolators with built-in bump stops. This kit was designed for and will work on all rear airbag-equipped Toyota Land Cruiser Prado 120 and 150 series, as well as Lexus GX470 and GX460 models.
Regular price $365.00Regular priceUnit price / perSold out -
MRR 3-way Adjustable Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2021, Lexus GX470 2.5-3.5" Lift
Dobinsons Rear MRR Shocks for Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear MRR Shocks for Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $640.00Regular priceUnit price / perSold out -
IMS Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2019, Lexus GX470 2.0-3.5" Lift
Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. IMS59-50575 - IMS, Long Travel, 730mm extended, 425mm compressed. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $290.00Regular priceUnit price / perSold out -
MRR 3-way Adjustable Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2021, Lexus GX470 2.5-3.5" Lift
Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $640.00Regular priceUnit price / perSold out -
IMS Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2019, Lexus GX470 2.0-3.5" Lift
Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. IMS59-50575 - IMS, Long Travel, 730mm extended, 425mm compressed. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $290.00Regular priceUnit price / perSold out -
MRR 3-way Adjustable Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2021, Lexus GX470 2.5-3.5" Lift
Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear Long Travel Twin Tube Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2.5-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $640.00Regular priceUnit price / perSold out -
IMS Rear Long Travel Shocks for Toyota FJ Cruiser and 4Runner 2003-2019, Lexus GX470 2.0-3.5" Lift
Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. Full Description Video Install Installation Guide OVERVIEW Dobinsons Rear Long Travel IMS Shocks for Toyota 4Runner 2003-2019 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5" of lift. Not suitable for vehicles with KDSS (too long), and 2" bump stop extensions and longer rear brakes line is required. Also requires long travel coils (variable rate), so that the coil doesn''t come loose or fall out of its place at full extension. IMS59-50575 - IMS, Long Travel, 730mm extended, 425mm compressed. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Cannot be used on vehicles with KDSS Installation video not available. Installtion guide not available.
Regular price $290.00Regular priceUnit price / perSold out -
ICON Vehicle Dynamics Custom Build Rear Shock (Pair) Gx/4Runner/ FJ Cruiser Eyelet Converted W/ Mount Conversion Bracket Kit
The ICON custom build shock is designed for maximum performance and durability. The kit includes eyelet conversions, mount conversion brackets, and shocks engineered specifically for your vehicle type. Enjoy smooth rides on all terrains with this top-quality suspension system. Full Description Video Install Installation Guide OVERVIEW The Icon Custom Build Rear Shock (Pair) Gx/4Runner/ FJ Cruiser is designed for maximum performance and durability. The kit includes eyelet conversions, mount conversion brackets, and shocks engineered specifically for your vehicle type. Enjoy smooth rides on all terrains with this top-quality suspension system. Installation video not available. Installtion guide not available.
Regular price $1,469.95Regular priceUnit price / perSold out -
ICON Vehicle Dynamics Custom Build Rear Shock (Pair) GX/4Runner/FJ Cruiser
Experience improved performance and longevity with Icon Custom Build Rear Shocks (Pair). Constructed from 2-piece refined 6061 aluminum alloy, these shocks are lightweight and highly durable, designed to provide superior compression and rebound control on rough terrain. Full Description Video Install Installation Guide OVERVIEW Experience improved performance and longevity with Icon Custom Build Rear Shocks (Pair). Constructed from 2-piece refined 6061 aluminum alloy, these shocks are lightweight and highly durable, designed to provide superior compression and rebound control on rough terrain. Increase the ride comfort and suspension of your GX/4Runner/FJ Cruiser with Icon Custom Build Rear Shocks (Pair). Installation video not available. Installation guide not available.
Regular price $1,469.95Regular priceUnit price / perSold out