Products

10 products

  • Toyota MCO Rear Coil (Intermediate) Land Crusier 80/100 Series

    The Toyota MCO Rear Coil (Intermediate) Land Cruiser 80/100 Series is engineered for enhanced ride and handling performance. It is designed with progressive rate technology which increases ride comfort and load-carrying capacity. Stronger material in the centre helps to reduce side-to-side sway for smoother handling. Full Description Video Install Installation Guide OVERVIEW The Toyota MCO Rear Coil (Intermediate) Land Cruiser 100 Series is engineered for enhanced ride and handling performance. It is designed with progressive rate technology which increases ride comfort and load-carrying capacity. Stronger material in the centre helps to reduce side-to-side sway for smoother handling. Installation video not available. Installtion guide not available.

    Regular price $245.00
    Regular price Sale price $245.00
  • Black Hawk 4x4 Rear Upper Control Arm Land Cruiser 80 Series Adjustable

    The adjustable Black Hawk rear upper control arm are intended to re-align various components under the vehicle following a lift greater than 2 inches. This high-quality item is manufactured strongly to absorb the rigorous of four-wheel driving.  Full Description Video Install Installation Guide OVERVIEW The Black Hawk Rear Upper Control Arm LC 80/105 series is designed to improve handling and suspension control in your vehicle. This adjustable control arm is made of high quality steel and features heim joints for smoother operation and increased durability. Your ride will be smoother and more controlled. Installation video not available. Installtion guide not available.

    Regular price $295.00
    Regular price Sale price $295.00
  • Black Hawk 4x4 Rear Lower Control Arm Land Cruiser 80 Series (Extended)

    The Black Hawk Rear Lower Control Arm provides increased stability and improved handling for your vehicle. The 11mm extension makes it easier to tackle obstacles like large bumps and dips in the road without sacrificing traction. Highly durable and made from strong materials, this control arm will stand the test of time.  Full Description Video Install Installation Guide OVERVIEW The Black Hawk Rear Lower Control Arm provides increased stability and improved handling for your vehicle. The 11mm extension makes it easier to tackle obstacles like large bumps and dips in the road without sacrificing traction. Highly durable and made from strong materials, this control arm will stand the test of time.  Roadsafe Rear Lower & Upper Trailing Arms are built tough, so when you bump them up against rocks & tough terrain, they won’t bend as much as the standard arms. You’ve got to really give the Roadsafe ones a decent smack to get the 5mm wall thickness to buckle in. We’re not claiming Roadsafe arms are infallible, there will always be a bloke who wants to hang his truck up by the lower rear arms with bending consequences, but for your average 4WD’er one set of Roadsafe arms should see you through the life of your truck. Manufactured to factory bush specifications & supplied complete with high flex rubber bushings. Installation video not available. Installtion guide not available.

    Regular price $295.00
    Regular price Sale price $295.00
    Sold out
  • Black Hawk 4x4 Lower Control Arm Land Cruiser 80 series (Standard Length)

    The Black Hawk Lower Control Arm is designed to improve the steering response and ride quality of your vehicle. Made with superior grade materials, this control arm is longer-lasting and more reliable than conventional products. With its standard length, you can expect increased stability and improved accuracy in steering. Full Description Video Install Installation Guide OVERVIEW The Black Hawk Lower Control Arm is designed to improve the steering response and ride quality of your vehicle. Made with superior grade materials, this control arm is longer-lasting and more reliable than conventional products. With its standard length, you can expect increased stability and improved accuracy in steering. The Black Hawk lower trailing arms are built tough, so when you bump them up against rocks & tough terrain, they won't bend as much as the standard arms. They have been designed not only to be stronger than the genuine factory arms, but to also aid in pinion angle correction. These are set as standard lengths, and not available as adjustable, because strength really is an issue on these lower arms. These are supplied with high flex rubber bushings to suit for Toyota Landcruiser FJ80 FZJ80 HZJ80 HDJ80 HZJ105 FZJ105 Series. Installation video not available. Installtion guide not available.

    Regular price $295.00
    Regular price Sale price $295.00
  • Black Hawk 4x4 Adjustable Pan Hard Land Cruiser 80 series (Rear)

    The Black Hawk Adjustable Pan Hard is a reliable and durable suspension component designed to enhance steering response. It features adjustable length to ensure a precise fit and maximum alignment accuracy. This product is designed for superior handling and stability. Full Description Video Install Installation Guide OVERVIEW The Black Hawk Adjustable Pan Hard is a reliable and durable suspension component designed to enhance steering response. It features adjustable length to ensure a precise fit and maximum alignment accuracy. This product is designed for superior handling and stability. Rubber and Urethane bushings are the same dimensions as factory original, so all rods are manufactured to factory bush specifications. Bushing replacement if required is easy – just use factory original or aftermarket. Design changes over time have seen the implementation of double nuts for extra security, 150mm of adjustment to suit for 2-6” lifts and fine 2.0mm pitch thread for finer adjustability.  Black Hawk adjustable pan hard rods are one of the few on the market that are manufactured from a solid bar as standard, as well as boasting an increase in the outside diameter. It’s only a matter of time for any vehicle that is used for serious off-road work that the factory pan hard will break/bend. This will cause the body of the vehicle to move uncontrolled off center to the chassis, damaging fuel filler lines, steering linkages, and more! Installation video not available. Installtion guide not available.

    Regular price $295.00
    Regular price Sale price $295.00
  • Toyota MCO 55MM Front Coil Springs (Heavy Duty) Land Cruiser 80 Series

    Formerly known as Slinky Suspension, these front coils for an 80 Series Land Cruiser are the best coils Australia has to offer. The dual rate of these coils accommodates a front bumper and winch to achieve a 55mm lift height over stock. This is the last production run of these coils. You need them and we've got them while supplies last.  Full Description Video Install Installation Guide OVERVIEW Installation video not available. Installtion guide not available.

    Regular price $245.00
    Regular price Sale price $245.00
  • Toyota MCO 75MM Front Coil Springs (Heavy Duty) Land Cruiser 80 Series

    Formerly known as Slinky Suspension, these front coils for an 80 Series Land Cruiser are the best coils Australia has to offer. The dual rate of these coils accommodates a front bumper and winch to achieve a 75mm lift height over stock. This is the last production run of these coils. You need them and we've got them while supplies last.  Full Description Video Install Installation Guide OVERVIEW Installation video not available. Installtion guide not available.

    Regular price $245.00
    Regular price Sale price $245.00
  • Black Hawk 4x4 Adjustable Pan Hard Land Cruiser 80 Series (Front)

    The Black Hawk Adjustable Pan Hard provides superior strength and rigidity for more accurate camber alignment and improved handling. Its adjustable design allows easy installation and adjustment of negative or positive camber. Enjoy greater stability and control with this well-engineered product. Full Description Video Install Installation Guide OVERVIEW The Black Hawk Adjustable Pan Hard provides superior strength and rigidity for more accurate camber alignment and improved handling. Its adjustable design allows easy installation and adjustment of negative or positive camber. Enjoy greater stability and control with this well-engineered product. Rubber and Urethane bushings are the same dimensions as factory original, so all rods are manufactured to factory bush specifications. Bushing replacement if required is easy – just use factory original or aftermarket. Design changes over time have seen the implementation of double nuts for extra security, 150mm of adjustment to suit for 2-6” lifts and fine 2.0mm pitch thread for finer adjustability.  Black Hawk adjustable Pan hard rods are one of the few on the market that are manufactured from a solid bar as standard, as well as boasting an increase in the outside diameter. It’s only a matter of time for any vehicle that is used for serious off-road work that the factory pan hard will break/bend. This will cause the body of the vehicle to move uncontrolled off center to the chassis, damaging fuel filler lines, steering linkages, and more! Installation video not available. Installtion guide not available.

    Regular price $295.00
    Regular price Sale price $295.00
  • Front IMS Shocks for Toyota Land Cruiser 80 1990-1997

    IMS59-60683 - Dobinsons FrontIMS Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Designed, developed and tested in Australia by Dobinsons Spring & Suspension Full Description Video Install Installation Guide OVERVIEW IMS59-60683 - Dobinsons FrontIMS Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Installation video not available. Installtion guide not available.

    Regular price $650.00
    Regular price Sale price $650.00
  • Front MRR 3-way Adjustable Shocks for Toyota Land Cruiser 80/100 series 1990-1997 for 0-3" of Lift

    GS59-682 - Dobinsons Rear MRR Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Specs:  630mm extended, 382mm compressed Designed, developed and tested in Australia by Dobinsons Spring & Suspension. Full Description Video Install Installation Guide OVERVIEW GS59-682 - Dobinsons Rear MRR Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Specs:  630mm extended, 382mm compressed Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 60mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir  Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Installation video not available. Installtion guide not available.

    Regular price $1,350.00
    Regular price Sale price $1,350.00