Products

7 products

  • Black Hawk 4x4 Upper Control Arm (Land Cruiser 100 Series)

    The Black Hawk 4x4 upper control arm is made from high-grade steel and featuring a durable finish, it offers superior durability with superior handling. Enjoy greater stability and responsiveness when you upgrade your 4x4 with the Black Hawk Upper Control Arm. UCA3841H fits Land Cruisers 1998-2007. Full Description Video Install Installation Guide OVERVIEW When a vehicle has raised suspension (this can be anything from 30mm or above) it will disrupt the vehicles relationship with factory set geometry and create issues such as… Reduced caster correction – causing vague steering and response Bump steer resulting in reduced handling – with an out of control feeling Clearance issues to suspension & wheels/tires – larger wheels can hit suspension components Some standard vehicles can have an issue of the UCA hitting the coil on full droop Strength of OE equipment in off road scenarios Roadsafe 4WD have developed their Blackhawk UCA range of product drawing from over 30 years of experience in the manufacture & supply of chassis parts including a full range of steering & suspension components. The Blackhawk UCA’s have been designed in conjunction with industry experts to ensure vehicle fitment is comprehensive. During the development process a large number of potential issues associated with lift were identified, and subsequent features were built into the product to overcome of offset them. FEATURES & BENEFITS Features standard to the Blackhawk UCA’s are: 3 degrees of fixed Caster correction Roadsafe have identified this as the perfect amount of correction required for lifts ranging from 30-70mm. By providing a bulk, fixed amount of caster, this offers the ability to utilize the factory adjustment to fine tune the caster required for the vehicles lift, with the UCA not being the limiting factor for increased droop relative to the other components. Camber change to meet OE spec, if your application requires increased camber, we can offer offset bushings to provide more camber. Clearance to larger aftermarket wheels & tires – we often see larger than standard size tires with wheel offsets having clearance issues to the OE UCA, our Blackhawk UCA’s minimize this as much as possible. Clearance to suspension components & chassis – a large number of OE UCA’s hit the coil or the chassis mounts on during the suspension travel limiting the amount of travel you can achieve, with revised bends and clearances identified the Blackhawk UCA’s will not contact the strut or the chassis limiting travel unless specifically designed to do so. Fixed position ball joint – Blackhawk UCA’s do not use an adjustable ball joint. With a fixed location ball joint we are able to offer OE specification for the ball joint itself. The position of the ball joint housings have been rotated to ensure the ball joint is not the limiting factor with maximum down travel. Roadsafe specifically chose a fixed ball joint for a number of reasons – in off road applications the ball joint receives a large amount of “bump” loads, which over time can either knock an adjustable ball joint out of position leading to increased tyre wear due to a change in caster. Changing from a fixed ball joint mount reduces the structural integrity of the mount and the mounting platform of the ball joint, with any remote traveling we need to ensure strength and reliability is not compromised. There will never be a need to adjust or re-adjust your caster once established with the Blackhawk arms as the ball joint cannot be knocked out of position. Maintain OE specification ball joint & bushings – regardless of where you may go, if you need to replace a ball joint or bushing you can use genuine replacement parts or aftermarket OE specification replacement items, regardless of how remote you are at home or abroad. Ball joint binding – Often we see the ball joint limiting the amount of down travel because the OE ball stud hits the side of the ball joint housing, this creates a stress point on the ball stud creating an environment for potential terminal failure of the ball joint, it also limits the amount of down travel possible when used in conjunction with aftermarket suspension and longer shock lengths. Securing ABS lines – we incorporate tabs and mounts where practical so the OE lines can be secured discreetly where possible, reducing the potential of sticks and other debris from damaging the sensitive lines. Increased strength compared to the OE design – The design of the Blackhawk arms have shown with the use of FEA to be much stiffer than the OE arms, providing the driver with increased handling and response when the Blackhawk arms are fitted when compared to the OE arms, this is illustrated by the amount of deflection the FEA results have provided, with 3 times less deflection in the Blackhawk UCA’s. Does this rigidity negatively transfer to the vehicle? – No, because the Blackhawk UCA’s use OE Rubber bushings, any NVH (Noise, Vibration and harshness) is absorbed in the rubber bushings before it makes it way to the chassis, you may find an increase in wear in the bushings which is directly related to how you drive the vehicle, the bushings are a consumable component of any vehicle, however you should expect years of trouble free service before you should need to replace the bushings. Heavy Duty Long life Ball joints – Roadsafe 4wd specially redesigned the OE ball joint into a more robust design, due to the nature of the application the 4wding community requiring a serviceable component. Subsequently Blackhawk UCA’s have a ball joint that is manufactured in the “hard to hard” style with a locating nylon disc that the ball stud terminates against, grease is pumped into the assembly through the top keeping everything lubricated and keeping any potential contaminants out of the boot region. The ball studs and seat area of the housing are all heat treated forming a hardened surface with the purpose of long life and limited wear. Dust Cap – Blackhawk UCA’s that utilise a press in ball joint feature a machined alloy dust cap, black anodized incorporating the Blackhawk logo, to deter corrosion. The cap position results in creating a sealed housing to protect the greasable top section of the ball joint from the elements such as water, dust & mud. Finish – All arms are sand blasted upon completion and E coated black for a durable discreet finish. E coating is the same process the vehicles manufacturer used for the original equipment you are replacing. Installation video not available. Installtion guide not available.

    Regular price $495.00
    Regular price $679.00 Sale price $495.00
    Sold out
  • Toyota MCO Rear Coil (Intermediate) Land Crusier 80/100 Series

    The Toyota MCO Rear Coil (Intermediate) Land Cruiser 80/100 Series is engineered for enhanced ride and handling performance. It is designed with progressive rate technology which increases ride comfort and load-carrying capacity. Stronger material in the centre helps to reduce side-to-side sway for smoother handling. Full Description Video Install Installation Guide OVERVIEW The Toyota MCO Rear Coil (Intermediate) Land Cruiser 100 Series is engineered for enhanced ride and handling performance. It is designed with progressive rate technology which increases ride comfort and load-carrying capacity. Stronger material in the centre helps to reduce side-to-side sway for smoother handling. Installation video not available. Installtion guide not available.

    Regular price $245.00
    Regular price Sale price $245.00
  • Front Long Travel IMS Shocks for Toyota Land Cruiser 100 series 1998-2007

    IMS59-60786 - Dobinsons Front IMS Shocks for Toyota 100 series 1998-2007. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. Full Description Video Install Installation Guide OVERVIEW IMS59-60786 - Dobinsons Front IMS Shocks for Toyota 100 series 1998-2007. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Suits 2.5"-3.0" lifts ONLY UCAs and Diff Drop Kit are REQUIRED when fitting this shock. Installation video not available. Installtion guide not available.

    Regular price $650.00
    Regular price Sale price $650.00
  • Front Long Travel IMS Shocks for Toyota Land Cruiser 100 series 1998-2007

    IMS59-60786 - Dobinsons Front IMS Shocks for Toyota 100 series 1998-2007. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. Full Description Video Install Installation Guide OVERVIEW IMS59-60786 - Dobinsons Front IMS Shocks for Toyota 100 series 1998-2007. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Suits 2.5"-3.0" lifts ONLY UCAs and Diff Drop Kit are REQUIRED when fitting this shock. Installation video not available. Installtion guide not available.

    Regular price $650.00
    Regular price Sale price $650.00
  • Front MRR 3-way Adjustable Long Travel Shocks for Toyota Land Cruiser 100 series and Lexus LX470

    Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. Full Description Video Install Installation Guide OVERVIEW Instructions Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 60mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir  Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Installation video not available. Installtion guide not available.

    Regular price $1,350.00
    Regular price Sale price $1,350.00
  • Front MRR 3-way Adjustable Shocks for Toyota Land Cruiser 80/100 series 1990-1997 for 0-3" of Lift

    GS59-682 - Dobinsons Rear MRR Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Specs:  630mm extended, 382mm compressed Designed, developed and tested in Australia by Dobinsons Spring & Suspension. Full Description Video Install Installation Guide OVERVIEW GS59-682 - Dobinsons Rear MRR Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Specs:  630mm extended, 382mm compressed Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons MRR shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. FEATURES & BENEFITS 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 60mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir  Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Installation video not available. Installtion guide not available.

    Regular price $1,350.00
    Regular price Sale price $1,350.00
  • ICON Vehicle Dynamics 98-07 LAND CRUISER 100 SERIES 0-3" FRONT 2.5 VS RR CDCV PAIR

    Introducing the Icon Coilover LC 100 Series, engineered for superior performance and designed with top-of-the-line components. Featuring adjustable ride height, fine-tuned damping rate, and heat-treated steel construction for increased rigidity and durability--all combined to deliver best-in-class performance on and off the track. Full Description Video Install Installation Guide OVERVIEW ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. FEATURES & BENEFITS ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Nitrogen charged monotube design with remote reservoir One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 7/8” diameter induction hardened, chrome plated shock shaft PTFE lined spherical bearings and application specific mounting hardw 6061 aircraft grade aluminum CNC machined components One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 100% Rebuildable 100% Revalveable Installation video not available. Installtion guide not available.

    Regular price $1,469.95
    Regular price Sale price $1,469.95