These are the LAST stock of Slinky Suspension shocks! The Slinky Suspension brand died off but the demand is still valid. Since Mill Creek Overland previously was the sole US distributor of the Slinky Suspension brand, we decided to bring back any remaining shocks Slinky Suspension had to offer, only at a KILLER deal. If you are unaware, these shocks are custom-built by ICON Vehicle Dynamics specific to the old Slinky brand. The product was in the middle of an improvement program and these were to be released as the new version of those infamous shocks. These shocks are best paired with a "long travel" spring. (We can help you source a set of VT springs from Dobinsons to suit your particular build.)  You're going to want longer brake hoses and extended bump stops too.  These are a 2.5" CDCV shock similar to what you will see offered from ICON but built for a greater purpose. You will not find these anywhere else! Specifications Improved Aluminum 2.5" diameter shock bodies that are more thermally efficient Remote reservoir design in the rear rather than the original piggyback setup that relied on a proprietary pin type of retention system A larger reservoir to increase oil volume and thus thermal capacity Larger shock hoses to increase volume of oil transferred Massive articulation combined with a wide range of adjustments to afford precise wheel control in varying conditions Improved aesthetics with slick anodized grey and black finish.  FK Rod end bearings CDCV valve allows for lower reservoir pressure than a non CDCV equipped shock, which decreases seal friction, improving compliance Internally calibrated per application based on motion ratio, shaft diameter, and vehicle weights Kit ships with 2 front shocks and 2 rear shocks and fits 80 Series Land Cruisers 1991-1997 *Product photo may be different than the actual item      

OVERVIEW ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure. *NOT sold in pairs FEATURES & BENEFITS Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Nitrogen charged monotube design with internal reservoir One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 5/8” chrome plated hardened steel shaft resists corrosion and pits 6061 aluminum rod end, top cap, and internals ensure strength and durability Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance Nitrile rubber top out bumper for noise free operation 100% rebuildable 100% revalveable

OVERVIEW ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost-effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure. *NOT sold in pairs FEATURES & BENEFITS Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Nitrogen-charged monotube design with internal reservoir One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 5/8” chrome plated hardened steel shaft resists corrosion and pits 6061 aluminum rod end, top cap, and internals ensure strength and durability Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance Nitrile rubber top out bumper for noise free operation 100% rebuildable 100% revalveable

Icon Bronco Tie Rods are designed for superior strength and easy installation. Made with high grade alloy steel and a corrosion-resistant coating, these tie rods are engineered to provide long-term stability for your vehicle's steering. Full Description Video Install Installation Guide OVERVIEW Icon Bronco Tie Rods are designed for superior strength and easy installation. Made with high grade alloy steel and a corrosion-resistant coating, these tie rods are engineered to provide long-term stability for your vehicle's steering. Installation video not available. Installtion guide not available.

The ICON custom build shock is designed for maximum performance and durability. The kit includes eyelet conversions, mount conversion brackets, and shocks engineered specifically for your vehicle type. Enjoy smooth rides on all terrains with this top-quality suspension system. Full Description Video Install Installation Guide OVERVIEW The Icon Custom Build Rear Shock (Pair) Gx/4Runner/ FJ Cruiser is designed for maximum performance and durability. The kit includes eyelet conversions, mount conversion brackets, and shocks engineered specifically for your vehicle type. Enjoy smooth rides on all terrains with this top-quality suspension system. Installation video not available. Installtion guide not available.

Experience improved performance and longevity with Icon Custom Build Rear Shocks (Pair). Constructed from 2-piece refined 6061 aluminum alloy, these shocks are lightweight and highly durable, designed to provide superior compression and rebound control on rough terrain. Full Description Video Install Installation Guide OVERVIEW Experience improved performance and longevity with Icon Custom Build Rear Shocks (Pair). Constructed from 2-piece refined 6061 aluminum alloy, these shocks are lightweight and highly durable, designed to provide superior compression and rebound control on rough terrain. Increase the ride comfort and suspension of your GX/4Runner/FJ Cruiser with Icon Custom Build Rear Shocks (Pair). Installation video not available. Installation guide not available.

This 2010-UP 4Runner/GX/FJ Cruiser EXT TRAVEL 2.5 VS RR COILOVER KIT 700LB is designed to provide up to 2.5" of front suspension lift and rear ride height adjustment with 700 lb capacity coil springs. Perfect for improving off-road performance, providing better ground clearance, and a custom look. Full Description Video Install Installation Guide OVERVIEW This 2010-UP 4Runner/GX/FJ Cruiser EXT TRAVEL 2.5 VS RR COILOVER KIT 700LB is designed to provide up to 2.5" of front suspension lift and rear ride height adjustment with 700 lb capacity coil springs. Perfect for improving off-road performance, providing better ground clearance, and a custom look. Installation video not available. Installtion guide not available.

The Icon Coilover LC 200 Series is a state-of-the-art suspension system with adjustable ride height and damping force. Its advanced construction is precision-engineered for improved stability and handling on the road. Achieve maximum control and comfort while maintaining a comfortable ride, no matter the terrain. Full Description Video Install Installation Guide OVERVIEW ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks. FEATURES & BENEFITS Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use 6061 aircraft grade aluminum CNC machined components ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression PTFE lined spherical bearings and application specific mounting hardw ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob 7/8” diameter induction hardened, chrome plated shock shaft One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road Nitrogen charged monotube design with piggyback reservoir Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 100% Rebuildable 100% Revalveable Installation video not available. Installtion guide not available.

Introducing the Icon Coilover LC 100 Series, engineered for superior performance and designed with top-of-the-line components. Featuring adjustable ride height, fine-tuned damping rate, and heat-treated steel construction for increased rigidity and durability--all combined to deliver best-in-class performance on and off the track. Full Description Video Install Installation Guide OVERVIEW ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. FEATURES & BENEFITS ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range Nitrogen charged monotube design with remote reservoir One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road 7/8” diameter induction hardened, chrome plated shock shaft PTFE lined spherical bearings and application specific mounting hardw 6061 aircraft grade aluminum CNC machined components One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish 100% Rebuildable 100% Revalveable Installation video not available. Installtion guide not available.