Vehicle Fitment Jeep Grand Cherokee WJ/WG Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade) Superior Design, thicker walls, longer travel Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage Matched to compliment Dobinsons Complete Suspension Systems -- Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Toyota Tacoma 2nd Gen Toyota Tacoma 3rd Gen Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Dobinsons IMS Rear Shocks for Toyota Tacoma 2005-2021, suitable for 0-2.5" of Lift, using original springs or Dobinsons springs. Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance - Enjoy the ride

Vehicle Fitment Ram 2500HD 4x4 2014-2018 Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Matched to compliment Dobinsons Complete Suspension Systems Specs: Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Ford Ranger USA 2018 on Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Jeep Gladiator JT 2020 on Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Holden Rodeo KB 1988-2003 Isuzu D-Max 3rd Gen 2020 on Mazda BT-50 2020 on Mitsubishi Triton L200 1987-2006 Nissan Navara D23, NP300 2014 on Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series These can be used with original coils or aftermarket. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Toyota Tundra 1st Gen Toyota Tacoma 2nd Gen Toyota Tacoma 3rd Gen Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance - Enjoy the ride

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore – for the ultimate in offroad handling 66mm/2.6� Bodied Series -- IMS59-60885 - Dobinsons Rear IMS Shocks for Toyota Tundra 2022 On. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Vehicle Fitment Toyota Tundra 2022 on Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore – for the ultimate in offroad handling 66mm/2.6� Bodied Series -- IMS59-60887 - Dobinsons Rear IMS Shocks for Toyota Tundra 2022 On. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series These can be used with original coils or aftermarket. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 56mm/2.2€? Bodied Series --These provide additional travel over stock, while also increasing size and thickness to maximum possible specifications for long life and excellent on and off road performance. Dobinsons IMS monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilising the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance - Enjoy the ride

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- Dobinsons rear IMS Shocks Specs: Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Will NOT work with vehicles equipped with HBMC (Hydraulic Body Motion Control) -- Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 60mm/2.6€? Bodied Series These can be used with original coils or aftermarket. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- IMS59-60684 - Dobinsons rear IMS Shocks for Toyota Land Cruiser 80 series 1990-1997 for 6" of Lift. Can be used to replace stock shocks or added with 6" lifted coil springs. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- IMS59-60682 - Dobinsons Rear IMS Shocks for Toyota Land Cruiser 80 series 1990-1997 for 0-3" of Lift. Can be used to replace stock shocks or added with 2" to 3" lifted coil springs. Specs: 630mm extended, 382mm compressed Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- IMS59-6068 - Dobinsons Rear IMS Shocks for Toyota Land Cruiser 80 series 1990-1997 for 4" of Lift. Can be used to replace stock shocks or added with 4" lifted coil springs. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series -- Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world. As Dobinsons Spring & Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMSshock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Originally equipped shock absorbers are prone to shock fade and when a vehicle is loaded simply cannot cope with the additional weight and the harsh condition that 4X4 owners love to put them through. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade) Superior Design, thicker walls, longer travel Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage Matched to compliment Dobinsons Complete Suspension Systems Sold in Pairs These can be used with original coils or aftermarket. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office. The importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Fully Designed, Manufactured, and Finished In Australia