Full Description OVERVIEW Rear Coil Spring Specs: C59-223V (Lifts 1.00") No Extra Load C59-167 (Lifts 2.00") No Extra Load and (Lifts 1.50") up to 220lbs constant Load C59-175V (Lifts 2.00") up to 220lbs constant Load C59-185 (Lifts 2.00") up to 440lbs constant Load C59-171 (Lifts 2.00") up to 880lbs constant Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated A suitable full replacement for the AHC hydraulic system when installed all together. Will not work for airbag equipped vehicles.

Front Coil Spring Specs: C45-256 (65mm-2.5") Stock Load / (50mm-2") 110Lb Load C45-254 (75mm-3.0") Stock Load / (65mm-2.5) 110Lb Load C45-442 (75mm-3.0") 110-220Lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated

Front Coil Spring Specs: C45-256 (65mm-2.5") Stock Load / (50mm-2") 110Lb Load C45-254 (75mm-3.0") Stock Load / (65mm-2.5) 110Lb Load C45-442 (75mm-3.0") 110-220Lb Load Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Strut Assembly Video

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 4 Coil Springs If you are looking for a leveled stance, select C59-544 and C59-559V Coils are SIDE SPECIFIC, Install on the side shown on the white tag ****WILL NOT WORK WITH AHC (ACTIVE HEIGHT CONTROL)**** ***2.5" or more of lift, new UCA's are recommended*** ****Coil seat for IMS59-60688 should be set at 222mm(8.74") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions KDSS instructions --Dobinsons offers this complete suspension system for all 2007-2019 Toyota Land Cruiser 200 Series applications. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 60mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 4 Coil Springs. Aproximate hub to guard measurments C59-559V Stock Load 24" C59-535 Stock Load 25" C59-545 Stock Load 26" Coils are SIDE SPECIFIC, Install on the side shown on the white tag ***2.5" or more of lift, new UCA's are recommended*** ****Coil seat for IMS59-60688 should be set at 222mm(8.74") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions KDSS instructions -- Dobinsons offers this complete suspension system for all 2007-2019 Toyota Land Cruiser 200 Series applications. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs If you are looking for a leveled stance, select C59-544 and C59-559V **** (WILL NOT WORK WITH AHC (ACTIVE HEIGHT CONTROL)**** Coils are SIDE SPECIFIC, Install on the side shown on the white tag Strut assembly instructions KDSS instructions --Dobinsons offers this complete suspension system for all 2007-2019 Lexus LX570 applications. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs Aproximate Hub to Guard Measurments C59-559V Stock Load 24" C59-535 Stock Load 25" C59-545 Stock Load 26" Coils are SIDE SPECIFIC, Install on the side shown on the white tag Strut assembly instructions KDSS instructions --Dobinsons offers this complete suspension system for all 2007-2019 Toyota Land Cruiser 200 Series applications. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Includes 2 Front MRR Struts, 2 Rear MRR Shocks and 4 Coil Springs. If you are looking for a leveled stance, select C59-544 and C59-559V Coils are SIDE SPECIFIC, Install on the side shown on the white tag NOT Compatible with AHC (Active Height Control) Suspension ***2.5" or more of lift, new UCA's are recommended*** ****Coil seat for MRA59-A688 should be set at 222mm(8.74") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions KDSS instructions Front Reservoir Instalation Instructions Rear Reservoir Instalation Instructions -- . Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 60mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€?HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€?wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Includes 2 Front MRR Struts, 2 Rear MRR Shocks and 4 Coil Springs. If you are looking for a leveled stance, select C59-544 and C59-559V Aproximate hub to guard C59-559V Stock Load 24" C59-535 Stock Load 25" C59-545 Stock Load 26" Coils are SIDE SPECIFIC, Install on the side shown on the white tagv ***2.5" or more of lift, new UCA's are recommended*** ****Coil seat for MRA59-A688 should be set at 222mm(8.74") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.***** Strut assembly instructions KDSS instructions Front Reservoir Instalation Instructions Rear Reservoir Instalation Instructions -- Dobinsons offers this complete suspension system for all 2007-2019 Toyota Land Cruiser 200 Series applications. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height --Dobinsons offer this complete suspension system, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement supsension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new coils, Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

All rear heights are measured on a vehicle with 3rd row seating Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Kit Includes Choice of Front Coil Springs IMS43-50800 Front Struts Choice of Rear Coil Springs IMS43-50785 Rear Shocks -- Dobinsons offers this complete suspension system, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact Dobinsons directly if you have questions before ordering. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Base Kit Includes 2 Front Shocks, 2 Rear Shocks, 4 Coil Springs and Castor Bushing Kit Castor bushing kit instructions -- Dobinsons offers this complete suspension system with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact Dobinsons directly if you have questions before ordering. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.