3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm/60mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM€�HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€�wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design 2.2" Front and 2.6" Rear Precision Honed Shock Bodies This complete comes with everything you need, including: Front and Rear Leaf Springs (choose load rating) MRA59-A701 Front MRA Shocks Rear Leaf Springs (choose load rating) MRA45-A115 Rear MRA Shocks PB59-1019K Front Leaf Spring Polyurethane Bushing Kit UB59-668K Front U Bolt Kit SP59-007 Front Greasable Pins SK59-047/SK59-048 Front and Rear Greasable Anti-Reverse Shackle Kits (left and right sided) PB59-1020K Rear Leaf Spring Polyurethane Bushing Kit UB59-453-1K Rear U Bolt Kit SP59-023 Rear Greasable Pins Dobinsons„ ¢ leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions. Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application. For more information on Dobinsons Leaf Springs, visit: https://www.dobinsonsprings.com/suspension/springs/leaf-springs Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. **Note: Due to the overall size and weight of this suspension, the suspension is packed and shipped on a pallet, and the shipping is to the nearest freight terminal ONLY for you to pick up at your leisure, or to a commercial address with a forklift or loading dock. An additional charge will have to be calculated if a residential delivery is required.

Made from the highest quality raw materials to give years of life under the harshest conditions Over 60 years of leaf spring design and manufacturing Design features include Drawn, tapered and thinned leaf ends Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel, Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride. Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel This complete comes with everything you need, including: Front and Rear Leaf Springs (choose load rating) Front and Rear Greasable Poly Bushing Kits with unique diamond-shaped grease traps Front and Rear Twin Tube Shocks Front and Rear Greasable Anti-Reverse Shackle Kits (left and right sided) and Greasable Pins Front and Rear U-Bolt Kits Dobinsons„ ¢ leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions. Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application. For more information on Dobinsons Leaf Springs, visit: https://www.dobinsonsprings.com/suspension/springs/leaf-springs Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. **Note: Due to the overall size and weight of this suspension, the suspension is packed and shipped on a pallet, and the shipping is to the nearest freight terminal ONLY for you to pick up at your leisure, or to a commercial address with a forklift or loading dock. An additional charge will have to be calculated if a residential delivery is required.

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Strut assembly instructions Quick Ride Kit Instructions --Dobinsons offer this complete 2.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for vehicles looking for 2.0" of lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2" lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end. Dobinsons complete rear leaf packs could always be ordered separately later if you choose to replace the Quick Ride Kit, and to gain more load handling capacity with lift. Dobinsons offers multiple full leaf pack options with poly bushings, greasable pins, and U-bolts. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Base Kit Includes 2 Front Struts, 2 Rear Shocks, 1 steering damper and 4 Coil Springs -- Dobinsons offers this complete suspension system with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact Dobinsons directly if you have questions before ordering. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Fully re-buildable and re-valvable Zero shock fade in all terrains with full load Direct, bolt-on replacement for easy fitment Corrosion resistant (EDP Surface Protection) Heavy duty single piece lower leg Enormous oil capacity Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability Race inspired hi-flow CNC 6061 Billet alloy piston 60mm bore €“ for the ultimate in offroad handling 66mm/2.6€? Bodied Series Chassis Variants May Require An Additional Hole Drilled In SE59-517 Bracket Kit Includes Choice of Front Coils Choice of Front Shocks Choice of Rear Coils Choice of Rear Shocks RB59-522K Rubber Caster Bushings -- Dobinsons offers this complete suspension system with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact Dobinsons directly if you have questions before ordering. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Chassis Variants May Require An Additional Hole Drilled In SE59-517 Bracket Kit Includes Choice of Front Coils Choice of Front Shocks Choice of Rear Coils Choice of Rear Shocks RB59-522K Rubber Caster Bushings -- Dobinsons offers this complete suspension system with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact Dobinsons directly if you have questions before ordering. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Available with 2-3 Week Lead Time Lift Height Constant Load Pre Load Setting 50mm - 2.0" 0-85lb Load 90mm 50mm - 2.0" 220-440lb Load 100mm 70mm - 2.75" 220-440lb Load 110mm 75mm - 3.0" 0-85lb Load 103mm 75mm - 3.0" 110-175lb Load 110mm 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 60mm CNC Machined High Flow Billet Aluminium Race Piston 2.6" Diameter precision honed shock bodies with HD 3mm thick walls Upgraded 3 Stage FKM€�HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low€�wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Includes: C92-3016650 - Front Coil Springs Inner Diameter - 3.0" Length - 16" Spring Rate - 650lb/in MRA59-A710 - Front MRR Coilovers Choice of Rear Coil Springs MRA59-A713 Rear MRR Shocks MRA59-A710 Instructions -- Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Fully re-buildable and re-valvable vZero shock fade in all terrains with full load Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel Corrosion resistant (EDP Surface Protection) Direct, bolt-on replacement for easy fitment 2.2" Precision Honed Shock Body 50mm hi-flow CNC 6061 Billet alloy piston Heavy duty single piece lower leg Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Quick Ride Kit Instructions --Dobinsons offer this complete 1.75-3.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for vehicles looking for 1.75-3.0" of lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2" lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end. Dobinsons complete rear leaf packs could always be ordered separately later if you choose to replace the Quick Ride Kit, and to gain more load handling capacity with lift. Dobinsons offers multiple full leaf pack options with poly bushings, greasable pins, and U-bolts. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our MRR shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Can be used to replace old worn coils and shocks from other kits with similar lift heights. Kit includes front and rear coil springs and shocks. Front coil springs (Choose One) IMS59-60682 Front IMS Shocks IMS43-50784 Rear IMS Shocks Rear coil springs (Choose One) Dobinsons offer this complete suspension system, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement suspension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and coil springs. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons IMS shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons IMS shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Front Coil Spring Specs C59-302 - (40mm-1.6") Stock front end C59-314 - (50mm-2.0") Stock front end C59-352 - (50mm-2.0") Heavy load front end (110-240lbs) / (60mm-2.4") Stock front end C59-354 - (60mm-2.4") Heavy load front end (110-240lbs) / (70mm-2.75") Stock front end C59-318 - (75mm-3.0") Heavy load front end (110-240lbs) 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you. 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes. 20 Stage Low Speed Compression - For creepy crawling and cornering 15 Stage Rebound - Control your coils, prevent bucking 50mm CNC Machined High Flow Billet Aluminium Race Piston 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm Upgraded 3 Stage FKM-HNBR Sealing System TSUGAMITM CNC machined components for precise tolerances ParkerTM Braided High Pressure Hoses 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA T6 6061 Height Adjustable Spring Seat Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance 60mm Full 6063 aluminum remote reservoir Lightweight CNC Machined Low Friction floating piston High Quality O.E.M. Grade Natural Rubber Bushings Single Piece Lower Leg EDP Surface Protection Direct Bolt-On Design CNC TIG Precision Welded Body End Mounts Fully Rebuildable Design Reservoir Installation Instructions Front Strut Assembly Instructions Strut Assembly Video Quick Ride Kit Instructions--Dobinsons offer this complete 2.0" suspension system for the 2005-2022 Toyota Tacoma 4x4 Double Cab, designed to give a great ride front and rear, for vehicles looking for 2.0" of lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2" lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end. Dobinsons complete rear leaf packs could always be ordered separately later if you choose to replace the Quick Ride Kit, and to gain more load handling capacity with lift. Dobinsons offers multiple full leaf pack options with poly bushings, greasable pins, and U-bolts. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Our MRR shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our MRR shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle Coils are specifically suited to the additional accessory load (weight) on the vehicle Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel High Quality Australian-made coil springs, heat treated, fully scragged, powder coated Choose your desired suspension parts to build the kit best suited to your weight and desired lift height Can be used to replace old worn coils and shocks from other kits with similar lift heights. Kit includes front and rear coil springs and shocks. Front coil springs (Choose One) GS45-125B Front Shocks GS51-117S Rear Shocks Rear coil springs (Choose One) Dobinsons offer this complete suspension system, designed to give a great ride front and rear, for stock vehicles looking for a complete replacement suspension, with various load rating options to get the correct lift height and load support for how your vehicle is built. The kit price starts with new front struts and coils, new rear shocks and coil springs. Additional parts can be added for a more complete suspension. Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. Dobinsons Twin Tube shock absorbers are made from the world€™s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons Twin Tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„ ¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Designed to exact OE top mount specs T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance Allows quick method of correcting a vehicle lean without complete strut disassembly Sold individually --Dobinsons offer this 1/4" black anodized alloy strut spacer, to fit between the strut mount and the tower of the vehicle. These are primarily used to correct for vehicle lean, most commonly added to the US driver''s side when it is sitting lower than the passenger side. Or if 2 of them are bought, you could evenly lift the front of the vehicle. A 1/4" spacer at the strut equals approximately 1/2" lift at the wheel. This spacer is designed to fit multiple vehicles with just 1 part number. Those vehicles are: Toyota Land Cruiser 200 Series - all years Lexus LX570 - all years Toyota Tundra - 2007 to 2019 Toyota Sequoia - 2008 to 2019 Note: You cannot use more than 1 on each strut. There will not be any threads remaining to properly secure the strut into place.

Store your valuables dry and safely using Dobinsons 10L Dry Bag. Designed using 500D PVC, to keep your clothes and valuables dry and separated from the rest of your gear.

12,000 Capacity, 6.5HP Series Wound Motor, 216:1 Gear Reduction, 57 LBS Weight, 10x4.5" Mounting Pattern, 6.3 x 8.3 x 21.5" Overall Dimensions 64 x 224mm Drum, Automatic Braking Action, 3 Stage Planetary Gears, Plug in Control Range of 10 FT Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops Sealed Solenoid Box, More Powerful, Easy Quick Flop Clutch, Improved Casings, Motor Housing Breather Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range) --This new range is re-engineered, re-designed and stronger in every way. Whether you require the flexibility of synthetic rope winches or prefer the traditional steel cable winches, Dobinsons has it. Match your New 2nd Generation Winch with our winch accessories and you€™ll be ready for action! More Powerful - Improved 12V series wound motor provides increased power and winching efficiency. Housing Breather - Each winch is equipped with a motor housing breather, 2 meter nylon air hose and filter for increased water protection. Improved Casings - Strengthened single piece gearbox casing is now much smaller, stronger and also includes 304 grade stainless steel cross rods. Redesigned Clutch Handle - Our new quick-flip style clutch handle allows much easier clutch operation and reduces the winches overall height. Sealed Solenoid - Improved single fully sealed solenoid for extreme durability, housed in a new heavy duty control box. Dobinsons winches have a 1 year warranty against manufacturing defects.

High Quality Polyurethane, maintains height over time Perfect fit between OE isolator and coil seat Sold as 1 pair, available front and rear for several vehicles Lasts longer than rubber Easy to add lift height for worn coils -- Poly Coil spacer 15mm of lift. Sold as a pair. Dobinsons Spring & Suspension offer these quality polyurethane coil spacers, designed to add additional lift to your vehicle if your coil springs have sagged or lost height over time. Sold in pairs, each spacer is intended to be mounted between the coil seat and the original coil isolator, to avoid any possible noise issues. NOTE: Adding coil spring spacers to the vehicle may cause "coil bind" (all coils closed together) before the bump stop comes into effect. This can cause very serious damage to the spring and/or suspension components. Please consider this before ordering.

High Quality Polyurethane, maintains height over time Perfect fit between OE isolator and coil seat Sold as 1 pair, available front and rear for several vehicles Lasts longer than rubber Easy to add lift height for worn coils -- Poly Coil spacer 15mm of lift. Sold as a pair. Dobinsons Spring & Suspension offer these quality polyurethane coil spacers, designed to add additional lift to your vehicle if your coil springs have sagged or lost height over time. Sold in pairs, each spacer is intended to be mounted between the coil seat and the original coil isolator, to avoid any possible noise issues. NOTE: Adding coil spring spacers to the vehicle may cause "coil bind" (all coils closed together) before the bump stop comes into effect. This can cause very serious damage to the spring and/or suspension components. Please consider this before ordering.

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish --Sold as a pair Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Fully Designed, Manufactured, and Finished In Australia Ultra modern design technology, Fully Scragged & Load Tested State of the Art Heat Treatment, High Intensity Shot Peened Formed on Precision Mandrels, Precise End Configurations Durable Powder Coat Finish --Sold as a pair Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter. We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons„¢ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.